Suppose two bags of pump seals have the same dimensions and cure quarter. Can receiving tip them into one bin before packing repair kits? Preserve the original lot identity. The quarter gives a time interval; it does not establish a common compound, moulding lot or process record. If one bag later proves suspect, the date alone cannot tell which kits or installed pumps need review.
Keep three kinds of information connected
First identify the part: drawing, revision, dimensions and approved compound grade. A polymer family such as nitrile or EPDM does not define the exact compound or hardness. Second, capture the supplier's traceable lot under the agreed definition, for example the identifier tied to mixing and moulding records. Third, record the date and what it means, such as month or quarter of cure or a separate agreed storage starting point. Order date, relabel date and cure date are not interchangeable.
Ask whether one label can cover multiple mixes, moulding batches or periods. At receiving, connect the bag code, lot, quantity, acceptance paperwork and inventory record. At repacking, assign a traceable small-pack code and keep the link from original bag to small pack and service kit. If a kit contains parts from multiple lots, record the origin of each component. A kit number can describe an assembled package, but it does not replace the original identity of the seals it contains.
Walk through a simulated complaint
Suppose bag A and bag B each contain 500 seals cured in the same quarter. They are used in different kits. If the compound report for B must be reviewed, the buyer with a complete map can locate kits packed from B and the corresponding stock. If both bags were mixed with no way to reconstruct the split, the entire 1,000 pieces and related kits may need a hold. This example illustrates how the review scope grows; it does not declare every unit defective.
If a label goes missing, hold the affected bag as identity unresolved. Check original packaging records, manufacturer confirmation and, where useful, suitable identification tests. Colour and hardness can support screening. They cannot reconstruct a missing production lot. Even a laboratory result identifying the polymer family does not prove the seals came from the originally approved batch. Release is a documented decision by the responsible team. If the formula, supplier or coding method changes, update the change record and trace one real kit through it.
Keep the physical and electronic steps aligned. A spreadsheet mapping is useless if the container in the repair room still carries an obsolete label. Include a count reconciliation and an example pack-out in the receiving check. That lets the buyer distinguish a broken chain of identity from an actual compound discrepancy.
Match date rules to the precision supplied. If the maker gives only a quarter, do not invent the final day of that quarter in receiving records and use it to extend a storage allowance. Apply the relevant material guidance and agreed convention or request a more precise date. Repacking date matters because it identifies when packaging was opened and where stock went; it does not reset material age. Account for destructive receiving samples in the lot quantity, too. If part of an original bag went to a laboratory, the remaining stock and the sample should still reconcile. Otherwise the same bag can appear as two unrelated lots after a system transfer. When compound consistency is in doubt, hold the physical stock and its mapping instead of overwriting the label and losing the original relationship.
Frequently asked questions
Does the same day of cure establish the same lot?
No. Use the supplier's traceable lot identifier or a documented link to the production records.
Is copying the cure date onto each small bag enough?
It preserves one field. The small bag should also trace to the original bag, compound and inspection.
Can two different rings in a kit share a batch number?
The kit may have its own assembly code. The original component lot of each ring must remain recoverable.
